바이오 오베르틸 라이저 제작을위한 디스크 펠트 화기

  • 용량 : 0.5-6 t/h

  • 가격: $2,000-100,000

  • 펠렛 시간: 3-8최소
  • 펠렛 크기: 1-8mm

  • 모터 파워 : 3-18.5 KW

  • 애플리케이션: 본질적인 &화합물 바이오 페티 리저

바이오 오베르틸 라이저 제조를위한 디스크 펠렛 라이저. 우리 회사에서, Pan Pelletizer는 최고의 판매 중 하나입니다 바이오 퍼티 리저 과립 장비 ~ 중에 드럼 세포터, 롤러 압출 펠렛 제조 기계, 드럼 과립 만들기 기계. 과립율이 높습니다, 만큼 높습니다 93%. 습식 과립 화 방법을 사용하여, 그것은 균일 한 직경과 둥근 모양으로 바이오 페티 리저 과립을 생성 할 수 있습니다.. 유 룬신 생산 모델이 다릅니다, 요구 사항에 따라 사용자 정의 할 수 있습니다, 가격은 저렴합니다. 문의를 환영합니다.

팬 과립 화 기계
디스크 바이오 비료 과립 라인

바이오 오퍼 틸리저를위한 팬 펠렛 라이저 공정이 가능한 원료?

바이오 페르 틸리저를위한 팬 펠렛 라이저는 유기 및 화합물 바이오 오베르틸 라이저 원료 모두에 적합합니다..

팬 granulatorofertilizer-disc-granulator에 의해 과립 화 된 화합물-바이오 닉 폐기물
펠렛 화 디스크의 화학/미네랄 재료

팬 과립 제작 기계를 사용하여, 유니폼을 얻을 수 있습니다, 다루기 쉬운 둥근 생물학적 비료 펠릿, 가게, 그리고 적용하십시오. 디스크 세금 조건에 대한 원료 수분의 영향에 대해 걱정할 필요가 없습니다.. Yushunxin은 과립 디스크를위한 고강도 유리 섬유 라이닝을 설계했습니다., 부식성과 내구성이 뛰어납니다.

디스크 펠렛 라이저는 어떻게 바이오 오베르틸 라이저 생산에서 작동합니까??

디스크 입력자의 작동 원리에는 주로 다음 단계가 포함됩니다.:

  • 1

    첫 번째, 분말 바이오 퍼티 리저를 디스크 펠렛 라이저의 호퍼에 넣으십시오..

  • 2

    그 다음에, 디스크가 회전하기 시작합니다, 원료가 디스크에 얇은 층을 형성하게합니다.. 다음, 디스크 내부의 스크레이퍼가 디스크 가장자리로 밀어 넣습니다..

  • 3

    그 다음에, 가루 또는 바인더가 뿌려지면서 가루 재질이 디스크에 굴러냅니다.. 디스크가 회전 할 때, 생물학적 원료는 점차 과립을 형성합니다.

  • 4

    결국, 바이오 퍼티 리저 펠릿은 디스크의 가장자리에 모입니다., 호퍼에 빠지십시오.

Biofertilizer 디스크 세포터는 얼마입니까??

Biofertilizer 디스크 입자기의 직경에 따르면, 로딩 용량과 출력도 다릅니다. 일반적으로 말하면, 출력은 직경에 비례합니다, 그러나 가격에도 비례합니다.

0.5-2 t/h 디스크 입자기: $1,000-$2,000

SXYZ-600의 모델, SXYZ-800, SXYX-1000, SXYZ-1200 및 작은 직경 과립 디스크의 다른 모델, 출력 0.5 장비 가격 사이의 ~ 2t/h $ 1,000~ $2,000.

팬 입군기
디스크 입력기 (2)

2-4 톤/시간 팬 입자기 $2,000-$4,000

생산 해야하는 경우 2 에게 4 시간당 수의 생체 수정, SXYZ-2000의 모델을 선택할 수 있습니다, SXYZ-2500, SXYZ-2800 디스크 과립 제작 기계. 그들의 가격은 일반적으로 사이에 있습니다 $2,000 그리고 $4,000.

4-6 톤/시간 디스크 펠렛 라이저: $4,000-$9,000

출력이 크면, 4-6t/h의 출력이있는 디스크 펠렛저를 선택하는 것이 좋습니다.. 그것은 그 사이의 비용입니다 $4,000 그리고 $9,000.

디스크 입력기

동시에, 자신의 필요에 따라 워터 파이프를 추가 할 수 있습니다., 그리고 생물학적 박테리아 제를 추가하십시오 필요에 따라. 물론, 추가 비용이 있습니다. 더 많은 가격 세부 정보, 아래 표를 클릭하여 저희에게 연락하십시오.

Biofertilizer 생산 계획을 세우십시오 !

 

모델 디스크 직경 (mm) 가장자리 높이(mm) 로타리 속도(R/분) 모터 파워(KW) 용량(t/h)
SXYZ-1500 1500 300 21 3 0.5-0.8
SXYZ-1800 1800 300 21 3 0.8-1.2
SXYZ-2000 2000 350 21 4 1.2-1.5
SXYZ-2500 2500 450 14 7.5 1.5-2.0
SXYZ-2800 2800 450 14 11 2-3
SXYZ-3000 3000 450 14 11 2-4
SXYZ-3600 3600 450 13 18.5 4-6

디스크 펠렛 라이저가 사용하는 과립 방법? - 습식 과립이 설명되었습니다

Biofertilizer 만들기를위한 디스크 펠렛 라이저는 습식 과립 방법. 이 기술에는 수분 함량이있는 원료가 필요합니다. 25% 그리고 50%. 이것을 달성하기 위해, YUSHUNXIN equips each disc pelletizer with a built-in spraying system. 작동 중, you can directly add water, biological stimulants, or microbial inoculants to the rotating disc, helping the fine powder bind and form uniform granules. Using our disc granulator with a precision spraying system enhances granulation uniformity.

pan granulator for bio fertilizer
granules biofertilizer

맨 위 3 Benefits of Using a Disc Pelletizer for Biofertilizer Making

In the process of producing biofertilizer, there are 3 main advantages to choosing a disc granulator.

가장 먼저, the granulation effect is good. The granulation rate of the biofertilizer disc pelletizer is as high as 93%. It is able to produce 1-8mm biofertilizer granules. By adding water during the granulation process, the granule formation is more beautiful. 하지만, before granulation, you’d better crush the material into 50 mesh fine powder first to avoid affecting the granulation effect.

YUSHUNXIN’s biofertilizer disc pelleting machine adopts a new desilting design. The unpowered combined scraper cleans the edges and bottom to avoid raw material adhesion. The whole machine is made of Q235B carbon steel, which is strong and durable. 게다가, the inner lining of the granulator disc is high-strength fiberglass, 부식성과 내구성이 뛰어납니다. 동시에, the bottom of the pelletizer disc is reinforced with multiple radiation steel plates, which will never deform. The main gear adopts high-frequency quenching to double the service life. 그러므로, the disc granulation performance is very good and it is worth choosing.

The output of the bio fertilizer disc granulator is between 0.5-6 톤, which is very suitable for small and medium-sized biofertilizer manufacturers. Under the action of the belt conveyor, you can continuously making the biofertilizer powder into granules. 동시에, it occupies a small area and has a compact structure. This can save you a certain amount of site costs. 그러므로, it is very cost-effective.

Details structure of pan pelletizer for small scale fertilizer making

Can I Adjust Bio Fertilizer Granule Size in a Pan Pelletizer?

물론. The finish bio fertilizer granules are usually between 1-8mm in size. You can make different size biofertilizer pellets through controlling the tilt angle and rotation speed of the pan granulation machine. A larger tilt angle will result in larger particles, while a faster rotation speed will lead to denser microbial fertilizer granules. 반면에, the more water added, the larger the biofertilizer granules diameter and the better the hardness.

Latest Case: Turnkey solutions for bio NPK fertilizer with disc granulator in Philippine

9 월 26, 2024,YUSHUNXIN’S disc granulator was successfully run in the Bio NPK Fertilizer Plant in the Philippines. The Philippine customer is looking forward to the bio fertilizer granulation machine that can produce 3 시간당 3mm NPK 바이오 퍼티 리저 톤. 게다가, they want to add some biological agents during the granulation process. 이런 이유로, we advise the disc granulator for them. According to customer feedback, the granulation effect of YUSHUNXIN’s disc granulator can meet the bio NPK fertilizer production requirements.

Why Choose YUSHUNXIN’s Disc Pelletizer for Your Biofertilizer Plant?

저희에게 연락하십시오

    우리 제품에 관심이 있거나 필요한 경우, 우리에게 문의를 보내 주시기 바랍니다!


    *우리는 당신의 개인 정보를 존중합니다, 귀하의 개인 정보는 다른 기관과 공유하지 않습니다..