The process of making liquid biofertilizer requires four steps: dehydration of raw materials, filtration of impurities, liquid sterilization, and mixed fermentation. Combining the above steps, we have planned four zones for bio liquid fertilizer plant in Singapore. At the same time, YUSHUNXIN can configure a complete liquid bio fertilizer production line, welcome to consult!

Usually, there are two processes for making bio liquid fertilizer. This is determined by the raw materials used. The Singapore plant intends to use animal manure as the raw material for liquid bio fertilizer. This requires six steps. First, separate the liquid from the animal manure. Next, build a manure sedimentation tank to settle the large impurities in the liquid. In addition, use a filtration device to obtain pure manure liquid. Then, the UV sterilizer will kill the pathogens in the manure liquid. After that, you can mix some microbial agent with the pure manure liquid, such as nitrogen, phosphorus, potassium, etc. After a few days of anaerobic fermentation, you will get animal manure liquid biofertilizer.

First, depending on the moisture content of animal manure, we provide screw extrusion dehydrators. It will quickly dehydrate the wastewater in the animal manure. Then, in order to get pure liquid bio fertilizer, it is necessary to use the filtration device. Next, using the UV sterilizers to Kill pathogens in manure liquid. The sterilization rate of YUSHUNXIN’s UV sterilizer reaches 99%. Then, YUSHUNXIN can provide the liquid bio fertilizer plant with anaerobic fermentation tank.